PTFE Knitted Wire Mesh
rough is: 0.20mm - 0.25mm).
Hole Size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same,width is different).
The surface condition of knitted mesh: Flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications.
The Co
2/6 next page prev page home page last page
go back |  refresh |  WAP home |  Web page version  | login
07/10 02:34